Why is Technologies SDS1102CML+ (Siglent) best selling?
Warranty: standard manufacturer’s warranty
S&H: Free shipping if ordered online
Dimensions and weight: check our reviews
Siglent’s SDS1102CML+ is the new improved variant of the well-liked sds1102cml. With a new higher resolution LCD display and the addition of a lan interface (also to USB) this SDS1102CML+ represents one of the most well-liked low-cost 100 MHz oscilloscopes available today.
SDS1302CFL 300 7" Display Oscilloscope 2CH+1EXT 2GSa/s Real Time Sample Rate AC -240V, 45Hz-440Hz vs SDS1102-CML+
Features: ●Memory depth of SDS1000CFL SDS1102CML+ is 24Kpts ●Use Colored TFT LCD, the waveform display is clearer and stable ●Screen saver function: 1 minute to 5 hours ●distinctive Digital Filter function and Waveform recorder function ●Pass/Fail function ●Thirty two parameters Auto measure function ●Cursor measure covers Manual mode,Track mode and Auto mode Application: 1. Implanted electronic circuit design and test 2. Mechanical and electrical merchandise design and analysis 3. Education and research 4. Product quality control 5. Real-time signal display 6. Product test,circuit function test plans: ●Model:SDS1302CFL ●Bandwidth:300MHz ●Channels:2CH+1EXT ●concurrent sampling rate:1GSa/s(each channel), 2GSa/s(half channel) ●Equivalent sampling rate:50GSa/s ●Memory depth:12K(each channel),24k(half channel) ●Rise time:<1. 2ns.
Fluke 123/003S Industrial ScopeMeter with SCC120 Kit, 20 Frequency
The Fluke ScopeMeter series 120 is a handheld electrical test device that combines a two-channel digital oscilloscope for looking at electrical signals with a true RMS, manual- and auto-ranging digital multimeter on each input for measuring AC and DC voltage to 1,250V, resistance to 50MΩ, capacitance to 500μF, frequency to 50MHz for Fluke 123 models and 70MHz for Fluke 124 models, and responsibility cycle from 2 to 98. The oscilloscope has a real-time sample rate of 25MS/s and a record length of 512 points per channel for acquiring waveforms. Auto and cursor measurement parameters let an in-depth analysis of waveforms, and edge and video causes let separation of particular signals. The oscilloscope’s advanced auto triggering recognizes signal patterns and automatically optimizes triggering, timebase and amplitude settings. It has an optical port for attaching a Fluke ITP120 probe (sold individually) for external triggering. The 5,000-count, true RMS (root mean square) multimeter gives correct readings when measuring linear or non-linear loads, despite of waveform. It has two ranging modes: manual, which lets the user to choose the operating range, and auto, which automatically selects the proper operating range. The relative function lets a measurement to be set as a reference value and displays successive measurements as a positive or negative deviation from that value, the touch-hold mode captures a stable reading, and the data-hold function freezes a reading on the display to aid documentation. A continuity buzzer confirms that the circuit conducts electricity, and a diode check detects if a circuit”s diodes are working properly. Setups and screen shots—up to 10 for the 20MHz models and 20 for the 40MHz models—may be stored in the interior memory. A TrendPlot map recorder graphs readings from both the oscilloscope and multimeter functions of the minimum and maximum values over time. The recorder may be programmed from 15 seconds per division over 120 seconds to 2 days per division over 16 days. Extra plans include a rise time of 17. 5ns for the 20MHz models and 8. 75ns for the 40MHz models, and different triggering features. The unit has a 2. 83″ monochrome LCD with a resolution of 240 x 240 pixels for looking at waveforms and measurements, and a backlight for visibility in low light. A multimeter is an electrical testing tool for measuring many properties of an electrical circuit to verify correct operation or diagnose problems.
Keysight Mixed Signal,4+8CH,200,MSOX2024A
NEW Breakthrough technology gives you more of everything.. Except cost Agilent’s newest line of oscilloscopes delivers superior performance with optional potential and features unmatched by any other merchandise in their class. And at prices intended to fit your budget. You get more: Space -InfiniiVision X-Series combines the potential of an oscilloscope, logic analyzer, and business-exclusive function generator in a compact size ideal for benches where space is at a premium. Speed – The 2000 series delivers up to 50,000 waveforms per second, and the 3000 up to 1 million– the business’s fastest update rate– so you see signal detail and rare anomalies more frequently. Memory – The 2000 series has up to 100 kpts of memory–40 times more than other scopes–so you may be able to catch long, non-repeating signals while maintaining a high sample rate. The 3000 series gives up to 4 Mpts of deep memory–without any of the deep memory hassles of other oscilloscopes Visibility – The 8. 5 inch WVGA display offers twice the looking at area with five times the resolution. Performance – The 3000 series also offers 33 automated measurements, nine parametric causes, six serial protocol causes, also as seven waveform math functions as well as FFT. InfiniiVision 2000 X-Series Analog Channels: 2 and 4 analog channels Digital timing channels: 8 on MSO models or with DSOX2MSO upgrade Bandwidth (upgradable): 70, 100, 200 MHz Sample rate: 1 GSa/s per channel, 2 GSa/s half channel interleaved mode Memory Depth: 100 kpts Waveform update rate: 50,000 waveforms per second WaveGen fitted 20 MHz function generator: Yes (choice DSOX2WAVEGEN) Segmented memory: Yes (choice DSOX2SGM) Mask bound testing: Yes (choice DSOX2MASK) Model: MSOX2024A Bandwidth:200 MHz Analog/Digital Channels: 4/8.
Handheld Oscilloscope Multimeter 2Channel 200 1GS/S 1M Memory Depth 6000 Counts DMM Analog Bargraph 5.6 inch TFT Color LCD vs SDS-1102CML+
Bandwidth 200MHz Channel 2 Real-Sample Rate 1GSa/s Equivalent Sample Rate 25GSa/s Record Length 1M Rish time 1. 7ns Timebase Accuracy 50ppm Time Base Range 2ns/div-40s/div Input Impandance 1M VOLTS/DIV Range 2mV/div5V/div A/D Converter 8bit Position Range 50V(5V/div), 40V(2V/div500mV/div), 2V(200mV/div50mV/div), 400mV(20mV/div2mV/div) DC get Accuracy 3 for Normal or Average acquisition mode, 5V/div to 10mV/div; 4 for Normal or Average acquisition mode, 5mV/div to 2mV/div. Bandwidth bound 20MHz Trigger Types Edge, Video, Pulse, Slope, Over time, Alternative Trigger Source CH1, CH2 Math +, -, x,, FFT, Invert Cursor Measurement Voltage difference between cursors: V; Time difference between cursors: T; Reciprocal of T in Hertz (1/T); Auto Measuerment Frequency, Period, Mean, Pk-Pk, Cycli RMS, Minimum, Maximum, Rise time, Fall Time, +Pulse Width, -Pulse Width, Delay1-2Rise, Delay1-2Fall, +responsibility, -responsibility, Vbase, Vtop, Vmid, Vamp, Overshoot, Preshoot, Preiod Mean, Preiod RMS, FOVShoot, RPREShoot, BWIDTH, FRF, FFR, LRR, LRF, LFR, LFF DMM Max. Resolution 6,000 Counts Testing Modes Voltage, Current, Resistance, Capacitance, Diode & Continuity Max. Input Voltage AC: 600V, DC: 800V Max. Input Current AC:10A, DC: 10A Max. Input Impandance 10M Display 5. 6″TFT 16K Color Display, 640480 dots Size 245mm x 163mm x 52mm Weight 1. 3KG(Without Package) Standard Probe PP200x2.
Hantek 60 5-in-1 Handheld Portable Oscilloscope W/ Multimeter Hantek DSO 8060
Feature: Five-in-one Handheld Oscilloscope Oscilloscope/DMM/ Spectrum Analyzer/Frequency Counter/Arbtrary Waveform generator 60MHz Oscilloscope Seperated GND Reference Hardware Frequency Counter random Waveform Generator:25Mz random waveform output 6000 COUNTS high precision DMM (sine wave can deliver up to 75 Mz) 200 MSa / s DDS, 12 bits of vertical resolution PASS/FAIL Check,easy to use on production line l FFT, +, -,, /,X-Y, 22 types of auto measurements High refresh rate High Real-time Sample Rate 150MS/s-2GS/s 50GS/s Equivalent-time Sample Rate 2 separate Time Base in ALT Trigger mode,easy to see 2 signal with different frequency 1000 waveforms save and record One Year maker Warranty.
Hantek DSO4102C 2 Channel 1 Channel Arbitrary/Function Waveform Generator 40K 1GS/s vs Siglent Technologies SDS1102CML+ pricing
General Introduction for DSO4000C series: 2 Channel Digital Oscilloscope. 1 Channel random/Function Waveform Generator. The Keys for osilloscope and waveform generator is seperated for convenient to operate it at the same time. Oscilloscope:100MHz Bandwidth, 1GSa/s Sample Rate. 25MHz random waveform generator, 12 bits resolution,200MHz DDS,7 inch 64K color LCD display, Resolution 800×480. Parameters: Model:DSO4102C 1. Oscilloscope Sample Rate:Sampling Rate Range:1GSa/s;Equivalent Sample Rate:25GSa/s 2. Acquisition Modes Normal:Normal data only Peak Detect:High-frequency and randon glith catch Average:Wavefom Average, selectable 4,8,16,32,64,128 3. Horizontal Sample Rate Range:1GS/s Waveform Interpolation:(sin x)/x Record Length:40K SEC/DIV Range:4ns/div to 40s/div 4. Vertical Vertical Resolution:8-bit resolution,all channel sampled at the same time Bandwidth:100MHz Rise Time at BNC(common):3. 5ns 5. Trigger System Trigger Types:Edge,Video,Pulse,Slope,Over time, Alternative Trigger Source:CH1,CH2,EXT,EXT/5,AC Line Trigger Modes:Auto, Normal, Single 6. Signal Source Mode Waveform blockage:DC-25MHz Sample Rate:200MHzDDS Output Waveform:random wave/square wave/sine wave/triangle wave/trapezoidal wave/pulse wave/DC Frequency Resolution:0. 1 Waveform Depth:4KSa Frequency Stability:＜30ppm.
Tektronix TDS2024C 200, 4 Analog Channel, 2 GS/s Sampling, Lifetime Warranty vs SDS-1102-CML+
The Tektronix TDS2024C 200 MHz, 4 Channel, 2GS/s Digital Storage Oscilloscope gives you with pay for able performance in a compact design. Filled with standard features as well as USB connectivity, 16 automated measurements, bound testing, datalogging, and perspective-sensitive help the Tektronix TDS2024C Series oscilloscopes assist you get more done, in less time. With up to 200 MHz bandwidth and 2GS/s maximum sample rate, no other digital storage oscilloscope offers as much bandwidth and sample rate for the price. Tektronix proprietary sampling technology gives real-time sampling with a minimum of 10X over sampling on all channels, all the time to precisely catch your signals. Sampling performance isn’t reduced when using many channels.
Instek GDS-0-U Series 5.7" TFT-LCD Portable 2 Input Channels vs Siglent Technologies SDS1102CML+ review
The Instek GDS-1000-U series is a two-channel, movable digital oscilloscope with a maximum real-time sample rate of 250MS/s, a record length of 4 kpts, auto-set function, advanced triggering, two basic math functions and FFT, 19 measurement parameters, an interior memory for data storage, data logging, and USB connectivity for electronics applications like like product design, assembly lines, fix and servicing, and electrical engineering, among others. The sample rate and record length enable long catch times for showing in depth waveforms. An auto-set function automatically configures the optimum settings for showing waveforms by selecting the horizontal and vertical scales, positioning the waveform horizontally and vertically, and selecting and activating the trigger source channel. Also to an edge trigger, the unit has pulse width and video causes for isolating a particular signal. Two basic math functions—add and deduct—plus FFT (fast fourier transform) and 19 measurement parameters like average, frequency, and peak-to-peak let an in-depth analysis of waveforms. A go/no go test function quickly indicates when a signal falls outside user-defined settings, and a zoom function magnifies details of waveforms. Up to 15 waveforms or 15 setups may be stored in the interior memory of the oscilloscope. A data logging function tracks data at user-defined timed intervals for up to 100 hours, logging the data on a USB flash drive (sold individually). Extra plans include a rise time of 7ns for the 50MHz model, 5ns for the 70MHz model, and 3. 5ns for the 100MHz model, and different triggering features. The oscilloscope has a 5. 7″ color TFT (thin film transistor) LCD with a resolution of 320 x 234 pixels and can show at the same time show up to two live and two stored waveforms. The oscilloscope has a USB host port for connecting a flash drive (sold individually) to store data and a USB device port for connecting to a PC for storing data and remote operation. The unit meets EN (European Standard) 61010-031 safety standard, and is rated for CAT (group) II installations to 300V, which covers energy-consuming equipment connected to a fixed installation, as well as household, office, and laboratory appliances. It has CE (European Conformity) marking. It comes with two passive voltage probes, a power cord for 100 to 240VAC, 50/60Hz, and a user manual. SpecificationsDisplay5. 7″ color TFT-LCDBandwidths available50, 70, 100MHzChannelsTwoMaximum real-time sample rate250MS/sRecord length4 kptsInstallation ratingCAT II, 300VStandards metEN 61010-1-031; CE markingPower sourcePower cord for 100 to 240VAC, 50/60HzDimensions (H x W x D)142 x 310 x 140 mmWeight2. 5 kgH is height, the vertical distance from lowest to highest point; W is width, the horizontal distance from left to right; D is depth, the horizontal distance from front to back. Oscilloscopes are electrical testing devices used to verify the functionality of equipment that generates an electrical signal. Oscilloscopes measure the voltage of an electrical signal over time, and display the measurement as a waveform in a visual graph. The waveform shows the sweeps (or refresh) of voltage on a vertical (Y) axis, and the time on a horizontal (X) axis. Details of a waveform show the signal over time. Most oscilloscopes have two or four channels for inputting a signal. Some digital oscilloscopes offer more than four channels, allowing channels to be dedicated to particular signals and applications. Bandwidth is the maximum frequency of a signal that an oscilloscope can catch. A constant image will display if a signal is shown at a high frequency. Oscilloscopes can be analog, digital, or mixed signal. An analog oscilloscope directly displays an input signal as a uninterrupted waveform, usually in a luminous phosphor on a cathode ray tube (CRT). A digital oscilloscope changes the input signal into a digital format and reassembles the waveform for display, usually on an LCD. A mixed signal oscilloscope (MSO) displays both analog and digital formats. Some oscilloscopes can display more than one channel and kind of measurement at the same time. Some oscilloscopes can catch waveform signals to memory, and recall them. They may supply real-time intensity grading, and may have the capability to change frequency of display. Oscilloscopes may be powered with batteries or electricity, or may have a fitted generator. They’re usually used for testing, measuring, and inspecting in science, engineering, telecommunications, vehicle, and electronics applications. GW Instek manufactures test and measurement equipment like oscilloscopes, spectrum analyzers, signal testers, and video surveillance systems. The company, founded in 1975 and headquartered in Taipei, Taiwan, meets International Organization for Standardization (ISO) standards 9002 and 14001. What is in the Box? Instek GDS-1000-U series digital oscilloscope(2) passive voltage probesPower cordUser manual.
Tektronix TDS3012C, 2 Channel, Analog 1.25 GS/s Sampling
The Tektronix TDS3012C is a 100MHz, two-channel, analog oscilloscope with a maximum real-time sample rate of 1. 25GS/s per channel, a record length of 10kpts per channel, and advanced causes for electronics applications like product design, assembly lines, fix and servicing, and electrical engineering education, among others. The 3,600wfms/s uninterrupted waveform catch rate identifies faults so they can then be lonely with advance causes (Edge, Video, expanded video, Pulse width, Runt, Rise/fall time, Pattern, State, Comm, and ALT). The real-time sample rate and the record length enable long catch times for showing in depth waveforms. Waveform measurements include FFT (fast fourier transform), and advanced math measurements are available with an optional TDS3AAM application module (sold individually). Extra plans include a rise time of 3. 5ns. The oscilloscope has ethernet and USB ports for communication, and extra ports are available with an optional TDS3GV communications module (sold individually). The TekProbe interface lets use with active, differential, and current probes (sold individually) for auto scaling and units. The oscilloscope has a 6. 5″ color TFT-LCD with a resolution of 640 x 480 pixels and an anti-glare surface for looking at waveforms. It’s battery-able with an optional TDS3BATC rechargeable lithium battery pack (sold individually). This analog oscilloscope is Canadian Standards affiliation (CSA) and European Conformity (CE) accepted and meets European Standard (EN) and International Electrotechnical Commission (IEC) 61010-1 safety standards. SpecificationsBandwidth100MHzChannelsTwoDisplay6. 5″ color TFT-LCDPower100 to 240V, 75W, battery-capableWeight3. 2kg/7lb. Dimensions (H x W x D)176 x 375 x 149 mm / 6. 9 x 14. 8 x 5. 9 inchesH is height, the vertical distance from the lowest to highest point; W is width, the horizontal distance from left to right; D is depth, the horizontal distance from front to back. Oscilloscopes are electrical testing devices used to verify the functionality of an electrical signal generator. Oscilloscopes measure an electrical signal over time, and display the waveform signals in a visual graph. The waveform shows the sweeps (or refresh) of voltage on a vertical (Y) axis, and can display time on a horizontal (X) axis. Details of a waveshape show the signal over time. Oscilloscopes can display in a digital or analog view. An analog oscilloscope has uninterrupted waveform display, usually in a luminous phosphor. Some oscilloscopes can display more than one channel and kind of measurement at the same time. Some oscilloscopes can catch waveform signals to memory, and recall them. Oscilloscopes may supply real-time intensity grading. Some oscilloscopes have the capability to change frequency of display. A constant image will display if a signal is shown at a high frequency. Oscilloscopes may be powered with batteries or electricity, or may have a fitted generator. They may have Canadian Standards affiliation (CSA) or European Conformity (CE) certification, or a particular group (CAT) safety ranking, like CAT5e. Oscilloscopes are usually used for testing, measuring, and inspecting in science, engineering, telecommunications, vehicle, and business applications. Tektronix manufactures test and measurement equipment like oscilloscopes, signal generators, and protocol, logic, and spectrum analyzers. The company, founded in 1946 and headquartered in Beaverton, OR, meets International Organization for Standardization (ISO) standards 9001 and 14001. What is in the Box? TDS3012C analog oscilloscopePassive probeSoftwareCalibration certificateUser manualPower cord.
Instek GOS-630FC General Purpose Portable Analog Oscilloscope with 5-Digit LCD Real-Time Frequency Counter, 30 Bandwidth, 2 Channels, Timebase Auto vs Siglent Technologies SDS1102CML+ price
The Instek GOS-630FC is a 30MHz, two-channel analog oscilloscope and frequency counter with an timebase auto-range function, ALT triggering, XY mode, Z-axis input, TV synchronization capability, and channel 1 output for electronics applications like product design, assembly lines, fix and servicing, and electrical engineering education, among others. A fitted real-time frequency counter measures frequency from 50Hz to 30MHz, showing readings on a five-digit LCD. The timebase auto-range function automatically selects the optimum sweep time for showing waveforms. This oscilloscope has a vertical sensitivity to 1mV per division for capturing low-level signals. An ALT triggering function displays the signal from both channels at the same time, and the XY mode compares the signal amplitude from each channel for determining the phase difference. The Z-axis input modulates the intensity of the waveform, the TV synchronization circuit lets triggering of TV-V and TV-H signals, and the channel 1 output can apply a signal to an external device. Extra plans include a rise time of 11. 7ns (50ns at 1 to 2mV per division) and different triggering features. The oscilloscope has a 6″ CRT (cathode ray tube) display with an interior 8 x 10 division grid (each division is 1 cm) for looking at waveforms and an LCD that at the same time shows readings for frequency, voltage per division, times per division, and XY mode. The LCD has a backlight for visibility in low light. The oscilloscope meets European Standard (EN) 61010-1:2001 safety standard and is rated for CAT (group) II installations to 300V, which covers energy-consuming equipment connected to a fixed installation, as well as household, office, and laboratory appliances. It has European Conformity (CE) marking. It comes with two 60MHz passive voltage probes, a power cord for 115/230VAC, 50/60Hz, and a user manual.
TM Atlantic AKTAKOM ADS-2111M dual channel Oscilloscope
This oscilloscope is thin and lightweight. It has a big screen and a convenient carrying handle. Attempt and fall in love with it This oscilloscope will generally give you a hint how to use it. Just press "HELP" and get User Manual on your oscilloscopes screen it’s ideal for learning and if you forgot any oscilloscopes function. VGA OUTPUT. Dual channels + external trigger. Bandwidth 100 MHz. Sample rate (concurrent) 1GS/s. Max Record length 10Mpts. 8? 800×600 Pixels LCD display.
Keysight Oscilloscope DSO1024A 200 4 Channels vs Siglent Technologies SDS1102CML+ reviews
Engineered to get you more scope than you thought you could pay for 1000 Series movable Oscilloscopes Weighs less than 7 pounds with a small footprint so it can go anywhere it ease. Will include:Power cord; 10:1 passive probe for each input channel; Documentation CD, Front panel overlay if other than English. 3-Year Warranty. Features: More Signal looking at 5. 7″ color LCD displays waveforms observably lighter and crisper Wider looking at angle 25 more waveform looking at area Up to 20k memory More potential 23 auto measurements Sequence mode for waveform recording, playback and storage Selectable band-pass filtering Advanced triggering More productivity Go/no-go mask testing 11 languages fitted USB port plus free IntuiLink connectivity software Model: DSO1024A Bandwidth: 200 MHz Sample Rate: 2GSa/sec half channel (when only one channel pair 1-2 or 3-4 is turned on), 1GSa/sec each channel Channels: 4 Display: 5. 7 inch diagonal color QCGA TFT LCD display with 300 cd/m2 backlight intensity Maximum Input Voltage: CAT I 300 Vrms, 400 Vpk; temporary overvoltage 1. 6Vpk.
- KKmoon High Precision Digital DDS Dual channel Signal Source Generator Arbitrary Waveform Frequency Meter 200MSa/s 25MHz
- Elenco TL 3 BNC to Minigrabber Test Lead Set
- RioRand 100 MHz Oscilloscope Clip Probes with Accessory Kit (Pack of 2)
- Elenco TL 17 BNC to Alligator Clips Test Lead Set, 36 Inch
- Paxcoo 17 Pcs Double Sided PCB Board Prototype Kit for DIY, 6 Sizes
- KKmoon XR2206 High Precision Function Signal Generator DIY Kit Sine/Triangle/Square Output 1Hz 1MHz Adjustable Frequency Amplitude
- Rigol DS1054Z Digital Oscilloscope 50 Mhz DSO 4 Channels
- Siglent Technologies SDS1052DL+ 50 MHz Digital Storage Oscilloscope
Models to consider:
|DS1102E TDS2004C||VT-DSO-2810 CQ5010C||MSO1074Z TBS1032B|
|ADS1102CAL GOS-630FC||WaveAce 2002 DSA832E||GOS-620FG TGP3122|
|DS1054z Kit2 RPL1116||TBS1064 GT-0015||3405D CM4371|
|VDS1022 TBS1052B-EDU||2205A BASIC SDG2042X||100001DSO1202S 3205D MSO|
|IO0000201-05 6022BE||DSOX2012A MUWH1202B-US||DS1054Z TBS1152B-EDU|
|GDS-1102B 3406D MSO||SDS1072CML SHS820||iMSO-204 TDS2014C|
|ADS-2061M TDS2022C||SDS7102 Fluke-124/003S||DSO5200 SDS1072CML|
|5442A SDS2072||EDUX1002A DP831||DSOX2014A SDS1202DL|
|MSO2202A DM3058E||CGM-102 1008c||TPS2014B MS6060|
|TDS2024C DS1M12||TDS3012C 3405D||ADS-2221MV ADS1062CAL|
|100001DSO1202S MSO1074Z||DS2202A 4224-IEPE||TO204A SSO8192|
|SDS1102CNL DSO4102C||DSOX1102G IO0000201-05||TBS1152 2208A|
|DSO5202P-INT Sds7102||GDS-2204E SDS7102||CQ5010C TGP3122|
|SDS1052DL SA-DS1000Z||DP711 TDS2014C||DM3058E DS202|
|VDS2064 2121C||TOL01241P BAG-DS1000||SDG2042X 3062AL|
|HDS1022M-N DS1054z Kit2||DS2072A-S SDS1202DL||TBS1052B-EDU SDS2072|
|DSO5200 TDS3052C||TBS1152B-EDU ADS-2031||DK-DS6000 DSO4202C|
|CM4371 DS4024||Hantek DSO8060 DSO203||DPO2002B DS1204B|
|TDS2002C ADS-2031||2206A DS1104Z-S Plus||GOS-630FC SDS1052DL+|
|iMSO-204 DS1102E||DSO4202C DSA1030A-TG||DS202 ADS1102CAL|
|DS2072A RDS 1021||HDS1022M-N FH-DG5000||3205D MSO WaveAce 1001|
|SHS815 GOS-620||MSO7102TD DSO203||SDS1204CFL Fluke-123/003S|
|SDS1102X GT-0015b||2204A Fluke-124/003S||CGM-101 PCSGU250|
|DSO112 3405D||3406D MSO SDS1304CFL||TBS1152 DSO4102C|
|HDS1021M TOL01241P||VT-DSO-2810 MSO2202A||SDS1202CNL DS2072A-S|
|DDS-140 CGM-102||DSO5102P DSG815||SDS1072CML MSO1074Z|
|TBS1202B-EDU TDS2014C||6022BL DS1104Z-S||GOS-620FG SS08|