April 23, 2017

Some more info about 987408 High (Talboys)


Graphs

How Talboys 987408’s price changed over last several months:
See how 987408 pricing changed last couple of months
Dispersion Speed High reviews compared with other similar products:
High Dispersion Speed isn't that bad compared to other products

Info

Other Info for this deal:

Warranty: standard manufacturer’s warranty
S&H: Free shipping if ordered online
Dimensions and weight: check our reviews
Coupon/Sale: n/a


General description

3 quick Dispersion Blade Fits 3/8 Diameter Shaf Features: intended for quick dispersion These blades tear particles separately and disperse them uniformly during the sample Constructed of stainless steel with welded bushing and a set screw for mounting on mixer shafts.


Recent reviews of Talboys 987408 High Speed Dispersion Blade, 3" Diameter, Stainless Steel, For 3/8" Shaft Diameter:



Compare with similar products:

Chemglass CG-2077-G-04 PTFE Stirrer Bearing, 10mm 24/40 Inner Joint

NEW Chem-Vac PTFE stirrer bearing 987408 gives a VACUUM TIGHT FLAKE-FREE SEAL. Two variants of the bearing are available, the standard series for 2L and smaller vessel capacities and the stabilizer series that incorporates a PEEK/PTFE stabilizing bushing that’s molded to the lower part of the inner joint. The stabilizer largely decreases stirrer shaft whip on bigger vessels. The bearing consists of a PTFE standard taper body, Glass filled polypropylene screw cap, PEEK Compression spring, PEEK/PTFE sleeve and a glass filled polypropylene loosening nut. The polymer blend sleeve gives a long lasting seal for use up to 500 RPM. Loosening nut above the standard taper inner joint lets easy and fast elimination.


Brand New Digital Electric heating plate magnetic stirrer

Specification: Model:MS300、 Stirring Volume: 02000mL 、 Stirring Speed: 01250rpm 、 Heating Temperature: 0300C 、 Top Plate Size: 135135mm 、 Panel Material: Stainless Steel 、 Power prerequisites: 110v or 220v (optional, by default, we’ll ship as indicated by the voltage of your Country) 、 Dimensions: 230(L)180(W)120(H)mm 、 Weight:2. 2kg、.


10" Polypropylene Stirring Rods w/7mm – Pack of 12

With an in general length of 10 inches and a diameter of 0. 28″ (7mm), this stirring rod was crafted from the thermoplastic polymer called polypropylene. Both ends of the stir rod have been rounded off, and may be fitted with a rubber policeman. Unlike its glass and rubber counterparts, polypropylene is very rugged, and features an unusually high resistance to chemical solvents (as well as most organic solvents), bases, and acids. It’s also completely autoclavable, although you’ll want to research what settings are proper for polypropylene.


Lab Armor Beads, 2 Liters

Lab Armor Beads are a revolutionary modern day idea for replacing water in baths, ice in ice buckets and aluminum blocks in dry block incubators. These distinctive thermal technology beads have a broad temperature range of -80&#176:C to 180&#176:C. Lab Armor Beads may also be used to replace aluminum blocks in dry block heaters. Help to preserve a clean and green environment in the laboratory. Improves energy efficiency of standard water baths by over 50. Stays Clean – Protected from water-borne contagion; Stays Organized – No more water accidents; Saves Time – generally on and prepared to use; Eco-Friendly – greatly recyclable beads, fewer harmful biocides and more energy economical. For extra info on keeping your Lab Beads clean, see the Specification Sheet link.


Chemglass CG-2076-01 PTFE Chem-Stir Complete Stirrer Bearing, 10mm 24/40 Inner Joint

Grease-free stirrer bearing intended for use under average vacuum applications. The bearing consists of a threaded glass adapter having an inner joint, a set of PTFE washer style bearings, a stainless steel spring, nylon alignment ring and Celcon compression cap. The distinctive design of this bearing gives hours of continous vacuum operation, with a minimum of “flaking” of the bearing surfaces.


Wilmad LG-9589A-096 Stirrer Adapter with Universal Joint, 6 mm Size

For connecting a 6, 8, 10 or 19 mm diameter stirrer shaft to the chuck of the stirrer motor. The common joint compensates for vibration and misalignment of the stirrer shaft, thus largely decreasing the danger of breaking. Consists, at the stirrer shaft end, of a split aluminum band bordering a nylon bushing. The stirrer shaft is put in into the bushing and secured by tightening the set screw in the aluminum band. This band and bushing assembly is connected to a stainless steel stud by a stainless common joint. This stud then connects the whole assembly to the chuck of a stirrer motor.


THT Block Clamp Support 5/8" Rods Made in USA

The block support clamp connects stirrer mounting rods or container holder mounting rods to stirrer stands and stirrer “C” clamps to stirrer mounting rods. This heavy responsibility support clamp is constructed of stainless steel and tightens with t-handle screws. Both openings accept rods up to 5/8″. Made in US.


Chemglass CG-2077-G-04 PTFE Chem-Vac Stirrer Bearing, 10mm 24/40 Inner Joint

NEW Chem-Vac PTFE stirrer bearing gives a VACUUM TIGHT FLAKE-FREE SEAL. Two variants of the bearing are available, the standard series for 2L and smaller vessel capacities and the stabilizer series that incorporates a PEEK/PTFE stabilizing bushing that’s molded to the lower part of the inner joint. The stabilizer largely decreases stirrer shaft whip on bigger vessels. The bearing consists of a PTFE standard taper body, Glass filled polypropylene screw cap, PEEK Compression spring, PEEK/PTFE sleeve and a glass filled polypropylene loosening nut. The polymer blend sleeve gives a long lasting seal for use up to 500 RPM. Loosening nut above the standard taper inner joint lets easy and fast elimination.


Lab Armor Beads, 4 Liters

Lab Armor Beads are a revolutionary modern day idea for replacing water in baths, ice in ice buckets and aluminum blocks in dry block incubators. These distinctive thermal technology beads have a broad temperature range of -80&#176:C to 180&#176:C. Lab Armor Beads may also be used to replace aluminum blocks in dry block heaters. Help to preserve a clean and green environment in the laboratory. Improves energy efficiency of standard water baths by over 50. Stays Clean – Protected from water-borne contagion; Stays Organized – No more water accidents; Saves Time – generally on and prepared to use; Eco-Friendly – greatly recyclable beads, fewer harmful biocides and more energy economical. For extra info on keeping your Lab Beads clean, see the Specification Sheet link.


LAB ARMOR INSULATED MINI-TRAY WITH BEADS

The Lab Armor Insulated Mini-Tray gives a distinctive way to keep samples at temperature under a fume hood, on a benchtop or while being carried. The Mini-Tray is one-4th the size of a regular ice can and convenient for use in tight spaces. Supplied with Lab Armor Beads and may also be used with ice. Mini-Tray is made from extended PVC bubble and has a temperature range of -196C to +93C.


Corning Metal Temperature Probe Support Clamp, 16.5mm Length x 11mm O.D

Corning offers a 7/16″ (1. 1cm) diameter by 6 1/2″ (16. 5cm) support clamp for Corning Cat. No. 6795PR and 400188 temperature probes. Support has two openings, 1/3″ (9mm) and 0. 15″ (3. 75mm), for holding probes. It’s intended to be used with a boss head clamp (Corning Cat. No. 440140) or standard right angle clamp.



What people considered before buying it:
  1. SHAVIV 29015 B10P TIN-Coated Deburring Blades (Pack of 10)
  2. Talboys 151LT Propeller Shaft, 2″ Blade Diameter, 5/16″ Shaft Diameter x 18″ Shaft Length, PTFE Coated


Models to consider:
BEA1000013 DYNCR 412575CG-2080-01 MS300CG-2076-01 21H1002
DSHM-1000 LG-9589A-09618900131SX 182LDRG-18900017 CG-2077-G-04
18900136SX 18101008SXCG-2077-G-21 A210004.1450CS U044
CG-2077-G-04 MS30021H1002 CG-2076-01004.1450CS U044
DYNCR 412575 18101008SXBEA1000013 18900131SXLG-9589A-096 DSHM-1000
CG-2077-G-21 A210DRG-18900017 CG-2080-01182L 18900136SX
DSHM-1000 MS300CG-2077-G-21 BEA1000013CG-2077-G-04 U044
18101008SX LG-9589A-09618900136SX 004.1450CS21H1002 DYNCR 412575
CG-2080-01 182L18900131SX CG-2076-01DRG-18900017 A210

Subscribe

Subscribe to 987408 best prices tracker for your city/stores

Select area


Select Store


Product Versions:


Email: